Showing posts with label Online Computer Help. Show all posts
Showing posts with label Online Computer Help. Show all posts

How to Partition and Formate the hard disk and install windows XP Using Windows XP Setup Programe

Author: Tom4u // Category: , ,
How to formate the ahrd disk and Insatll windows XP using windows XP setup programe. Here some steps are given below wich is help you to install windows XP.

Step 1: Partition the hard disk
a. Insert the Windows XP CD into your CD or DVD drive, or insert the first Windows XP Setup disk into the floppy disk drive, and then restart the computer to start the Windows XP Setup program.

Note If you are using the Windows XP Setup disks, insert each additional disk when you are prompted, and then press ENTER to continue after you insert each disk.
b. If you are prompted, select any options that are required to start the computer from the CD or DVD drive.
c. If your hard disk controller requires a third-party original equipment manufacturer (OEM) driver, press F6 to specify the driver.
d. At the Welcome to Setup page, press ENTER.

Note If you are using the Setup disks (six bootable disks), the setup prompts you to insert the Windows XP CD.
e. Press F8 to accept the Windows XP Licensing Agreement.
f. If an existing Windows XP installation is detected, you are prompted to repair it. To bypass the repair, press ESC.
g. All existing partitions and non-partitioned spaces are listed for each physical hard disk. Use the ARROW keys to select an existing partition, or create a new partition by selecting the non-partitioned space where you want to create a new partition. You can also press C to create a new partition using non-partitioned space.

Note If you want to create a partition where one or more partitions already exist, you must first delete the existing partition or partitions, and then create the new partition. You can press D to delete an existing partition, and then press L (or press ENTER, and then press L if it is the System partition) to confirm that you want to delete the partition. Repeat this step for each existing partition that you want to include in the new partition. When all the partitions are deleted, select the remaining non-partitioned space, and then press C to create the new partition.
h. To create the partition with the maximum size, press ENTER. To specify the partition size, type the size in megabytes (MB) for the new partition, and then press ENTER.
i. If you want to create additional partitions, repeat steps g. and h.
j. To format the partition and install Windows XP, go to step 2.

If you do not want to install Windows XP, press F3 two times to exit the Windows Setup program, and then do not follow the remaining steps in this post

To format the partition without installing Windows XP, use a different utility.

Step 2: Format the hard disk and install Windows XP
a. Use the ARROW keys to select the partition where you want to install Windows XP, and then press ENTER.
b. Select the format option that you want to use to format the partition. You can select from the following options:
• Format the partition by using the NTFS file system (Quick)
• Format the partition by using the FAT file system (Quick)
• Format the partition by using the NTFS file system
• Format the partition by using the FAT file system
• Leave the current file system intact (no changes)
Notes
• If the selected partition is a new partition, the option to leave the current file system intact is not available.
• If the selected partition is larger than 32 gigabytes (GB), the FAT file system option is not available.
• If the selected partition is larger than 2 GB, the Windows Setup program uses the FAT32 file system (you must press ENTER to confirm).
• If the partition is smaller than 2 GB, the Windows Setup program uses the FAT16 file system.
• If you deleted and created a new System partition, but you are installing Windows XP on a different partition, you are prompted to select a file system for both the System and Startup partitions.
c. Press ENTER.
d. After the Windows Setup program formats the partition, follow the instructions that appear on the screen to install Windows XP. After the Windows Setup program is finished and you have restarted the computer, you can use the Disk Management tools in Windows XP to create or format more partitions.

Explanation of error codes generated by Device Manager in Windows XP Professional

Author: Tom4u // Category: , , , ,
SUMMARY
You probably reached this article because Device Manager reported an error code, and you are not sure how to resolve it. In this Post, we will help you find your error code and suggest what you might try to correct the error in the next post.

If you are using Windows Vista, or another operating system other than the Windows XP versions listed in the "Applies to" section, please contact Support. For information about how to do this, visit the following Microsoft Web site:
http://support.microsoft.com/contactus

MORE INFORMATION
This section lists the error codes and possible resolutions for the error codes. The error codes are listed in numeric order.

Before you continue, make sure that you have the error code available. You can view the error code in the device Properties dialog box available in Device Manager. You can also resolve many of the errors within Device Manager.

To start troubleshooting, follow these steps:
1. Make sure that Device Manager is open, and that the device that has the problem is selected. You can perform some recommended resolutions through Device Manager.
a. Right-click My Computer, and then click Properties.
b. Select the Hardware tab, and then click Device Manager.
c. Double-click the device type that has the problem. For example, if you have problems with your modem, double-click Modems to see the devices in that category.

A list of devices appears. If a device has problems, the device has a red exclamation point next to it. If a device is unknown (usually because of missing drivers), the device has a yellow question mark next to it.
d. Right-click the device that has the problem, and then click Properties. This opens the device Properties dialog box. You can see the error code in the Device status area of this dialog box.
2. Use the Troubleshooting Wizard, if it is available, to help you diagnose and resolve your problem.
a. On the device Properties dialog box, click the General tab.
b. Click Troubleshoot to start the Troubleshooting Wizard. The wizard asks you some simple questions and provides a solution to your problem based on the answers that you provide. If the Troubleshooting Wizard is not available, go to step 3.
c. Follow the resolution steps provided by the wizard to resolve the problem.
d. Check the Device status area of the device Properties dialog box to see whether the error is resolved. If the error is resolved, you are finished. Otherwise, go to step 3.
3. If the Troubleshooting Wizard did not help you resolve your problem or was not available, locate your error code in this article.

Note If you cannot locate your error code in this article, contact Support. For information about how to do this, visit the following Microsoft Web site:
http://support.microsoft.com/contactus
4. Follow the recommended resolutions for that error code.
• Check the Device status area of the device Properties dialog box to see whether the error is resolved. If the error is resolved, you are finished.

• If the problem still occurs, unfortunately, this article did not resolve your problem. For your next steps, you may want to ask someone for help. Or, you may want to contact Microsoft Support to help you resolve this problem

Unable to remove network printer drivers

Author: Tom4u // Category: , , , ,
How to fix network printer driver problem

The driver will still be loaded by the spooler after removing a printer from
the registry. One needs to stop (I assume you are here since the spooler
is not currently running) the spooler and restart after any registry change.
the print driver registry key for 32bit machines is located under.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows
NT x86\Drivers\Version-3\PRINTDRIVERNAME

If the print driver uses a custom print processor it's sitting under this
location. You would need to look in the inf file that came with the printer
to know if it uses a custom print processor. Winprint is the print
processor that most inbox drivers use. Don't remove this entry. One
normally does not need to touch this key, just the driver.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows
NT x86\Print Processors

Resolve your technical issues with online computer support service providers

Author: Tom4u // Category: ,

Nowadays, computer support industry is booming like anything. As the statistic of computer enthusiasts is rising sharply, so is shooting up the demand in the industry for quality, economical computer support services.

A multitude of companies are dealing in computer support services and meeting the demands of high proliferation of computer enthusiasts. Besides computer repair, companies are also offering essential computer support that is needed by all computerized organizations, be them of any size or scale or at any location on the world map.

With Internet being a booming place for all tech savvies, these companies also strive to have a strong online presence. These resources generally offer a comprehensive array of computer support services for highly competitive rates. The existing cut throat competition in the industry has been further pushing the rates to be more competitive and services more specialized and proficient in nature than ever before.

Big computer makers like Apple, Microsoft, Dell, HP, IBM also run computer support services for their own manufactured models in more than one ways. These brands have their corresponding support centers across the international map. Their websites provide information on these support centers, user-friendly online help, FAQs, tips and tutorials. But, these support services are often highly expensive and cannot be afforded by general computer users.

On the other hand, general computer support providers offer extensive computer Help, including everything from computer set up/installation to troubleshooting, backup and recovery, battery related problems, brand components, performance and maintenance of computer and its connected devices.

Online computer support resources have highly trained technicians and computer engineers, who can resolve almost any PC related problems and hence extend satisfactory PC support to you. The spectrum of computer support services also includes online computer repair and maintenance.

These online vendors offer authentic support services to their customers. You can always check their websites and download these support utilities after registration. Furthermore, these resources offer high quality, affordable computer repair and home PC support.

You can also ask your online technical support technicians about tips and tweaks to make most of your computer.

How to repair Windows Registry hive Corrupted File

Author: Tom4u // Category: , ,

If your system gives the following Error massage “Your XP/2000 system displays the following error message: Stop error c0000218. Windows could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SOFTWARE” That means that the Software Registry Hive is corrupted. And you want to repair your and resolve these error follow the instruction given below It provided Computer Help to repair your computer.

.

1. Boot your system with the Windows XP/2000 Install CD, let the system start the Setup. Once in the Setup, choose to run the Recovery Console. Now type the following commands pressing Enter after each line.

md tmp
copy C:\windows\system32\config\software C:\windows\tmp\software.bak
delete C:\windows\system32\config\software
copy C:\windows\repair\software C:\windows\system32\config\software

Try to boot the system.

1.1 Zip the corrupted registry file .bak

2. If you don't have an XP/2000 CD with the Recovery Console on it, you can try removing your hard drive and connecting it your friend's system or installing another Windows system in a different directory. Then you can access the \Windows\System32\Config folder. Copy the files System, Security, Sam, Software and Default to a safe location. Then go to the \Windows\Repair folder. Those five files are your orginal registry files created when XP/2000 was first installed. Copy the file (with the name as the corrupted one) from the \Repair folder and paste it into the \Config folder.

Try to boot your system.

2.1 Zip the corrupted registry file.

3. Upload this file to us. Please wait until the 'The uploaded file has been successfully accepted by Willing Software' note appears.